Spectrum-controls 1734sc-IF4U Manual do Utilizador Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 50
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 25
3-4 Point IO™ 4 Channel Universal Analog Input Module
User’s Manual Pub. 0300266-01 Rev. A
3.) Configure the local Ethernet bridge module.
3.3.2 Add a Remote Ethernet Point IO Adapter
After you have added the local Ethernet communication module, you must add remote
Ethernet communication modules. A remote Ethernet module is a module that resides in a
separate chassis from the controller.
!
Attention
If you plan to use the 1734 Control Net adapter, you will need to install
the 1734sc-IF4U EDS file before scheduling the network. The latest
EDS files can be found at (www.spectrumcontrols.com).
1.) Select a New Module for the I/O Configuration.
Name the module
Select the module’s slot number
Enter IP address of ENBT
Select the module’s revision
level
Select electronic keying level
Click OK
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Comentários a estes Manuais

Sem comentários