Spectrum-controls 1762sc-IF4OF4 Manual do Utilizador descarregar pdf (Página 10)

MicroLogix™ Combo Analog Input/Output Module 10

Publication 0100161-01 Rev. B

Terminal Block Layout

Grounding the cable shield at the module end only usually

provides sufficient noise immunity. However, for best cable

shield performance, earth ground the shield at both ends, using a

0.01µF capacitor at one end to block AC power ground currents,

if necessary.

Labeling the Terminals

A write-on label is provided with the module. Remove the label from the door,

mark the identification of each terminal with permanent ink, and slide the label

back into the door.

TC/Voltage

Input Path

MicroLogix™ Combo Analog Input/Output Module 15

Publication 0100161-01 Rev. B



To Select

Make these bit settings

76543210

Input Type

4 to 20 mA 00

0 to 20 mA 0 1

Reserved 1 0

Channel Disabled 1 1

Open Circuit

(For Module)

Upscale 0

Zero 1

Temperature

Scale

(For Module)

Deg C 0

Deg F 1



Thisisamodulewidesettingwhichisonlyrecognizedwithinthe

configurationforChannel4.ThecorrespondingbitinChannel5isignored.

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Spectrum-controls 1762sc-IF4OF4 Manual do Utilizador Página 10